Eisele Circular Saws

Cold-cut accuracy and surface finish, with the cycle times your shop scheduler is asking for.
Contact Sales
Learn More

High-Performance Circular Saws

Circular cold saws win on finish quality and burr-free cuts. Eisele wins among circular saws on cycle time and machine life. We bring them in for shops that need clean, ready-to-weld ends on steel and non-ferrous stock without a secondary operation. Tell us your material mix, your cycle target and how the saw needs to feed downstream, and we'll spec, install and service the right Eisele across our Midwest and South service territory.
Vertical Circular Saws VMSUp-Stroking Circular Saws PSUHigh-Performance Automatic Circular Saws HCSHigh-Performance Aluminium Circular Saws VA-L

Vertical Circular Saws VMS

The VMS is the Eisele most of our shops start with. Straightforward to operate, built to take a beating, and accurate enough that the cut blanks go straight to the machinist or welder. Available semi-auto for mixed work or fully automatic when the cut list is steady.
  • Semi-Automatic VMS
  • Automatic Machines VMS

Up-Stroking Circular Saws PSU

When the work mixes straight cuts and mitres across multiple metals, the PSU keeps your operators from rotating between machines. A favorite for tube and bent-pipe operations where the bend dictates the cut angle, with semi-auto and full-auto configurations to match shop volume.
  • Semi-automatic machines
  • Semi-automatic machines for bent pipes
  • Automatic Machines

High-Performance Automatic Circular Saws HCS

If the saw is the bottleneck in your line, the HCS is built to clear it. Cycle times that hold up next to your stamping or machining cells, plus a duty cycle our highest-volume customers rely on for lights-out runs. The MF series adds magazine feed for fully unattended operation.
  • HCS E series
  • HCS MF series

High-Performance Aluminium Circular Saws VA-L

Aluminium and non-ferrous work asks for a different blade, a different feed and a different chip-management approach. The VA-L is engineered around exactly that — high feed rates with the surface finish architectural and aerospace customers expect, and the NC2 / NC3 control levels let you scale automation to match your run sizes.
  • VA-L 500 E
  • VA-L 560 NC2
  • VA-L 560 NC3

Do you have questions about our machines? We are happy to help you with the next step.

Contact Sales